Contact: Mr. Zhao
Telephone: 0571-82869769
Hand machine: 13362195566
Fax: 0571-83681287
Company address: hangzhou bay were C building 1001, 1002
Xiaoshan district, hangzhou city, the factory address: 269 hong da road bridge south development zone
Position:Home  > Common problem
Type of sorter
Author:B-smart Technology(Hangzhou) Co., Ltd. Date:2020/7/17 11:27:13

The sortingmachine is an indispensable part of the logistics system, instead of the former people sorting, the sorting speed is not too much improved, so now the general express delivery can be reached in three days, all have the credit of this sorting machine, so what are the types of sorting machines?


1. Baffle sorter


The baffle type sorter uses a baffle (stop bar) to block the goods moving forward on the conveyor and guide the goods to one side of the slide to discharge. Another form of the baffle is that one end of the baffle serves as a fulcrum for rotation. When the baffle moves, it blocks the goods to move forward like a wall, and uses the friction force of the conveyor to push the goods to move along the baffle surface and discharge them from the main conveyor to the slide. Usually, the baffle is located on one side of the main conveyor, so that the goods can continue to move forward; if the baffle moves horizontally or rotates, the goods are arranged to the slide.


Baffle is generally installed on both sides of the conveyor and does not contact with the upper plane of the conveyor. Even in operation, it only contacts goods and does not touch the conveyor surface. Therefore, it is applicable to most types of conveyors. As far as the baffle itself is concerned, there are also different forms, such as straight-line type and curved type, and some are equipped with rollers or smooth plastic materials on the working face of the baffle plate to reduce the friction resistance.


2. Floating sorter


Floating sorter is a kind of structural form which lifts goods from the main conveyor and guides them out of the main conveyor. From the direction of leading away from the main conveyor, one is that the leading direction forms a right angle with the main conveyor; the other is a certain angle (usually 30 ° to 45 °). Generally speaking, the productivity of the former is lower than that of the latter, and it is easy to produce a greater impact on commodities.


The floating sorter has the following forms:


1. Belt floating sorter, as shown in the figure. This kind of sorting structure is used on the roller type main conveyor. Two or more belts or single chains driven by power are installed horizontally under the main conveying rollers. When the sorter structure receives the command start inch, the belt or chain is lifted upward to touch the bottom of the goods, and the goods are lifted up and removed to the main conveying side.


2. The above are just the most commonly used types of sorting machines. Other opportunities will be introduced one by one next time. The appearance of sorting machines greatly improves the quality and time of logistics delivery, and also replaces manual work.